Filter
Top Products
Chapter 4 Recording
Chapter 4 Recording 4-15
4-2-3 Audio Dubbing on the Cue
Track
In the Digital Betacam format, in addition to the digital
audio channels recorded on the diagonal tracks, there
is also a longitudinal track, referred to as the cue track,
which can record a single analog audio channel.
The cue track can be used when adding an audio
channel to an already recorded tape.
Connections and settings for audio
dubbing
Connect the microphone or other audio source to the
AUDIO IN connectors. In audio dubbing, the input to
channel 4 is recorded on the cue track.
Connections and settings for audio dubbing
Headphones
Video monitor
VIDEO OUT AUDIO OUT3, 4
AUDIO IN 4
Set the audio input level
switch according to the
input level.
Set the CAMERA/LINE switch to LINE.
Audio monitoring device
(stereo amplifier, etc.)
Audio source
(microphone, etc.)
Set the CH-3/4 switch to MON.
To monitor the audio being recorded
on the cue track, set the MONITOR
SELECT switch to the CUE position.