Sony HDW-F500 DVD VCR Combo User Manual


 
4-3 TC Menu
4-22 Chapter 4 Menu Settings
Chapter 4 Menu Settings
Selecting the time code and the user bits
to be recorded
Use the [F6] (TCG SOURCE), [F7] (TCG MODE),
[F9] (DF/NDF), and [F10] (VITC) buttons in the TC
menu to specify the time code and the user bits to be
recorded. The specifications for the various button
settings are shown in the following table.
[F10] (VITC) [F7] (TCG
MODE)
[F6] (TCG
SOURCE)
[F9] (DF/NDF) Time code and user bits recorded
V IN Records the time code and the user bits input from the HD SDI
INPUT or SDTI (OPTION) IN
1)
connector to the video signal
AUX data area. The time code value generated by the time
code generator specified by the [F6] and [F7] buttons and the
user bits value generated by the user bits generator are
recorded longitudinally on the tape.
TCG prst DF/NDF/
auto
2)
The time code value generated by the time code generator and
the user bits value generated by the user bits generator are
recorded. Any time code can be specified for the time code
generator and the user bits generator. The running mode for
the recorded time code data conforms to that specified by the
[F9] button.
regene
3)
int-LTC The time code value generated by the time code generator and
the user bits value generated by the user bits generator are
recorded. The time code generator and the user bits generator
lock to the time data recorded longitudinally on the tape.
..........................................................................................................................................................................................................
int-VITC The time code value generated by the time code generator and
the user bits value generated by the user bits generator are
recorded. The time code generator and the user bits generator
lock to the time data recorded in the video signal AUX data
area on the tape.
ext-LTC The time code value generated by the time code generator and
the user bits value generated by the user bits generator are
recorded. The time code generator and the user bits generator
lock to the time data input from the TIME CODE IN connector.
ext-VITC The time code value generated by the time code generator and
the user bits value generated by the user bits generator are
recorded. The time code generator and the user bits generator
lock to the time data input from the HD SDI INPUT or SDTI
(OPTION) IN
1)
connector.
1) The SDTI (OPTION) IN connector is operative only
when the optional HKDV-506A SDTI Board is installed
and 701.VIDEO INPUT select in the VTR SETUP menu
is set to SDTI.
2) The DF/NDF setting on the [F9] button is applied to the
time code only when prst is specified by the [F7] button;
the DF/NDF setting is always applied for the CTL timer.
3) Specify the signal to be regenerated with 608.TCG/UBG
REGENE MODE in the VTR SETUP menu. Signals not
specified by this menu item are automatically set to
Preset mode, regardless of the [F7] button setting.
auto regene/int-LTC is set in assemble or insert mode and prst is
set in other modes.