Filter
Top Products
Appendix A-17
Appendix
Item number Item Settable range Function
005 SERVO/AV
REFERENCE
select
[input]
auto
external
The servo reference is determined by the following menu.
input: The reference signal is obtained from the HD SDI
INPUT connectors or SDTI (OPTION) IN connector.
auto: During recording and in the edit preset state, the
reference signal is obtained from the HD SDI INPUT
connectors or SDTI (OPTION) IN connector.
Note
When item 001 is not set to off, the reference singnal is
always external.
In all other cases, the servo operates using the signal
selected in item 006 as the reference signal. If the signal
selected in item 006 is not present, the servo operates
using an internal reference signal.
external: The servo reference signal is always external.
006 EXTERNAL
REFERENCE
select
[extrnHD]
extrn SD
When item 005 is set to external, this selects the signal used
as reference by this unit.
extrn HD: The signal input to the REF. IN HD connector is
used as the reference signal for playback and audio
signal recording.
extrn SD: The signal input to the REF. IN SD connector is
used as the reference signal for playback and audio
signal recording.
007 SYNC PLAY [off]
on
This is the mode for automatic correction at the start of
playback. In sync play mode, for example when playing back
the VTR from a preroll point, the IN point is reached after
exactly the preroll time has elapsed.
off: Selects normal playback mode.
on: Activates the sync play function for playback.
Note
In sync play mode, the time after the tape transport starts
until the video and sound appear is longer than in the normal
playback mode.
008 LOCAL FUNCTION
ENABLE
all disable
[stopeject]
all enable
local key map
When this unit is used in remote control mode, this selects
which buttons on the control panel operate.
all disable: All switches and buttons are disabled.
stop & eject: Only the STOP and EJECT buttons operate.
all enable: All switches and buttons except the RECORDER
and PLAYER buttons are enabled.
local key map: Only the buttons enabled in item 009 are
operational.
&