Filter
Top Products
Using the In-Wall Keypad
18
If you want to... Use the In-Wall Keypad and...
Turn the Remote Room off.
1. Press the POWER button.
2. If you've been watching a video source, turn off the room
television.
Lock a source.
In your Sony system, controls for the central entertainment
sources are located throughout your home. This creates the
possibility that users in the home theater room, for example, could
accidentally interrupt the viewing of a DVD in a bedroom. You can
prevent this by "locking" the source you're enjoying.
1. Press the
LOCK button on the status bar to lock the selected
source. A Light Emitting Diode (LED) in the button lights up to
indicate status.
• Amber: The selected source is locked.
• Off: The selected source is released.
2. The Lock status is also indicated by LEDs next to the SELECT
buttons in the source menu.
A. A GREEN LED indicates that the source is selected.
B. An AMBER LED indicates that the source is selected
and locked in another room. You are free to enjoy entertainment
from that source. But because of its "locked" status, you cannot
control that source from your room.
3. Press the
LOCK button again to release the selected source.