Filter
Top Products
46
GB
Audio Language Sets the language to be used for a programme. Some digital channels may
broadcast several audio languages for a programme.
Audio Description Provides audio description (narration) of visual information, when such
information is available.
Mixing Level Adjusts the TV main audio and Audio Description output levels.
Dynamic Range Compensates for differences in the audio level between different channels. Note
that this function may have no effect for some channels.
Optical Out Sets the audio signal that is output from the DIGITAL AUDIO OUT (OPTICAL)
jack of the TV. Set to “Auto”, when connecting equipment compatible with Dolby
Digital. Set to “PCM”, when connecting equipment not compatible with Dolby
Digital.
Radio Display Displays the screen wallpaper when you listen to a radio broadcast. You can select
the screen wallpaper colour, display a random colour or view a slideshow (page 24,
30). To cancel the screen wallpaper display temporarily, press any button.
Parental Lock Sets an age restriction to viewing. To view any programme rated for ages above the
age you specify, enter the correct PIN code.
1 Press the number buttons to enter your PIN code.
If you have not already set a PIN code, a PIN code entry screen appears.
Follow the instructions in “PIN Code” below.
2 Press F/f to select an age restriction or “None” (for unrestricted watching),
then press .
3 Press RETURN.
PIN Code To set a PIN for the first time
1 Press the number buttons to enter a PIN code.
2 Press the number buttons to enter the PIN code entered in step 1.
3 Press RETURN.
To change your PIN
1 Press the number buttons to enter your PIN code.
2 Press the number buttons to enter a new PIN code.
3 Press the number buttons to enter the new PIN code entered in step 2.
4 Press RETURN.
z
• PIN code 9999 is always accepted.
Technical Set-up Auto Service
Update
Enables the TV to detect and store new digital services as
they become available.
System Update Enables the TV to automatically receive free software
updates through your existing antenna/cable (when issued).
We recommend that you leave the setting to “On” at all times.
System
Information
Displays the current software version and the signal level.