Filter
Top Products
16
Menu System
Menu System
Using the Features menu you can:
a) Select if you want to listen to the sound from the TV set directly or through an external amplifier.
b) Automatically adjust the size of picture.
c) Select a time period after which the TV set switches itself into standby mode.
d)
Lock the buttons on the TVset. In this way, the TV set only works by using the remote control buttons.
e) Select the source to be output from the Scart connector :3/q3 (SMARTLINK). In this way you can record from this scart
connector while watching another source. If your VCR supports Smartlink, this procedure is not necessary.
Using the Features Menu
1 Press the button on the remote control to display the menu
on the screen.
2 Push the joystick to select the symbol, then push to
enter the Features menu.
3 Push the joystick or to select the desired menu item, then
push to enter (see the table below for the effect of each menu item).
4 Push or to select the desired setting and press the button
to store.
5 Press the button to exit and return to the normal TV screen.
Features Effect / Operation
Speaker Main (sound from the TV set)
Centre In (sound from external amplifier)
Auto Format Off: Size of picture is not automatically adjusted.
(only for aerial Normal: Size of picture is automatically adjusted
signal) according to the broadcaster information.
Full: The TV set automatically adjusts the picture
size to eliminate any dark areas on the TV picture.
Format Correction
Off: 4:3/14:9 is selected.
(only if Auto Format
is set to “Normal”
On: Smart mode is selected automatically for
or “Full”)
4:3/14:9 broadcast.
Sleep Timer
Off
10 min.
20 min.
.
.
.
90 min.
• One minute before the TV set switches into
standby mode, the time remaining is displayed
on the screen automatically.
•When watching the TV, press the button
on the remote control to display the time
remaining.
•To return to normal operation from standby
mode, press the TV button on the remote
control.
Parental Lock Off (Normal mode)
On (The TV set can only be switched on using the
remote control, the buttons on the TV do not
work)
AV3 Output TV (audio/video signal from the aerial)
AV1
(audio/video signal from the Scart
connector :1/ 1).
AV2 (audio/video signal from the Scart
connector
:
2/
2).
AV3 (audio/video signal from the Scart
connector
:
3/q3 (SMARTLINK)).
AV4 (audio/video signal from the connector … 4
placed in the front of the TV set).
If you have connected a decoder, please
remember to change the AV3 Output back to
"TV" for correct unscrambling.
Picture Adjustment
Select: Enter Menu:
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
AI
Noise Reduction
Colour Tone
Personal
On
Off
Normal
Features
Auto Format
Format Correction
Sleep Timer
Parental Lock
AV2 Output
Normal
On
Off
Off
TV
Select: Enter:
Speaker
Main
Speaker
Main
Centre In
10 min
Sleep Timer
Parental Lock
Off
On
AV2 Output
TV
AV1
AV2
AV3
AV4
Auto Format
Off
Normal
Full
Format Correction
Off
On
01GBKF50/42SX200.fm Page 16 Tuesday, January 7, 2003 9:58 AM