Filter
Top Products
8
Installation
Installation
Connecting cables are not supplied.
Connecting the Aerial and VCR
Stabilizing the TV set the set
After setting up, secure the TV set to a wall, etc., using the supplied brackets and screws, for safety purposes.
1
Mount the two supplied brackets with the screws provided to the upper rear side of the TV set.
2
Pass a strong cord or a chain through each bracket, and then secure to a wall or a pillar, etc.
or
VCR
The Scart lead is optional, however if you use a Scart lead to connect your VCR it can improve picture and sound quality
when using it.
If you do not use a Scart lead, after automatically tuning the TV set, refer to the "Manually Tuning the TV" section of this
instruction manual, to tune in the set to the output of your VCR. Also, refer to your VCR instruction manual to find the
output channel of your VCR.
OUT IN
Do not block or cover this ventilation opening. For
ventilation, leave a space of at least 10 cm from the wall.
01GBKF50/42SX200.fm Page 8 Tuesday, January 7, 2003 9:58 AM