Filter
Top Products
13
GB
The Picture Adjustment Menu
The “Picture Adjustment” menu allows you to
alter the picture settings.
To do this:
Press the MENU button and then press OK to
enter this menu. Next press
v or V to select the
desired option and press OK. Finally read below
how to operate into each option.
Picture Mode This option allows you to customise the Picture Mode based on the programme
you are watching. After selecting this option press OK. Next press repeatedly
v
or
V to select:
Personal (for individual settings).
Live (for live broadcast programmes, DVD and Digital Set Top Box receivers).
Movie (for films).
Once you have selected your desired option, press OK to store.
"Brightness", "Colour" and "Sharpness" level of "Live" and "Movie" mode are fixed on the
factory to get the best picture quality.
Contrast Press
B or b to reduce or enhance picture contrast. Next press OK to store.
Brightness Press
B or b to darken or brighten the picture. Next press OK to store.
Colour Press
B or b to decrease or to increase color intensity. Next press OK to store.
Hue Press
B or b to decrease or to increase the green tones. Next press OK to store.
Sharpness Press
B or b to soften or to sharpen the picture. Next press OK to store.
Reset Press OK to reset the picture to the factory preset levels.
Noise This option is set to On to automatically reduce the snowy picture
Reduction visible in the broadcast signal. To cancel this function, press
v or V to select Off.
Colour Tone This option allows you to alter the tint of the picture. After selecting this option
press b. Next press repeatedly v or V to select: Warm (gives the white colours
a red tint), Normal (gives the white colours a neutral tint), Cold (gives the white
colours a blue tint). Next press OK to store.
Lines While viewing an RGB input signal from the PC connector, some picture
Correction lines may be not correctly displayed. To correct this problem, select this option
and press
b. Next press repeatedly v or V to correct it berween -20 and +20.
Finally press OK to store.
• "Brightness" "Colour" and "Sharpness" only appears and only can be altered if "Picture
mode" is set to "Personal".
• "Hue" only appears and only can be altered for NTSC signal (e.g. USA video tapes).
• For an RGB input signal connected to the PC connector, only appear and only can be
altered: "Contrast", "Brightness" and "Lines Correction".
.
TV Functions
,