Filter
Top Products
Installing and Connecting the LCD Projection TV
41
Installing and Connecting the LCD Projection TV
KF-42/50WE620
2-108-981-13(1)
Connecting a DVD Player with Component
Video Connectors
This is the preferred hookup to use if:
❑ Your DVD player has component (Y, B-Y, R-Y) jacks.
Disconnect all power sources before making any connections.
1 Using three separate component video cables, connect the DVD player’s
Y, B-Y and R-Y jacks to the Y, P
B and PR jacks on the LCD projection
TV. Use the HD/DVD IN 5 or 6 inputs.
2 Using audio cables, connect the DVD player’s AUDIO OUT jacks to the
LCD projection TV’s AUDIO IN jacks. Be sure to use the same row of
inputs that you used for the video connection (HD/DVD IN 5 or 6).
✍ The Y, B-Y and R-Y jacks on your DVD player are sometimes labeled
Y, C
B and CR, or Y, PB and PR. If so, connect the cables to like colors.
Rear of LCD
projection TV
DVD player
AUDIO-L
(white)
P
B
PR
AUDIO-R
(red)
Y
Component video cable
(not supplied)
Audio cable (not supplied)
✍ To take advantage of the Wide Screen modes, set the TV’s aspect
ratio to 16:9 on your DVD player. For details, refer to the operating
instructions supplied with your DVD player.