Sony KLV-26S200A Flat Panel Television User Manual


 
18
GB
KLV-46S200A
2-891-357-11(1)
Picture menu
You can select the options listed below on the Picture
menu. To select options in “Settings”, see “Navigating
through menus” (page 17).
Target Inputs
Selects whether to apply settings made in the Picture menu to all inputs, or only to
the input currently being watched.
“All”: Applies settings to all inputs.
“Viewing Only”: Applies settings only to the current input.
Picture Mode
Selects the picture mode.
“Vivid”: For enhanced picture contrast and sharpness.
“Standard”: For standard picture. Recommended for home entertainment.
“Custom”: Allows you to store your preferred settings.
Reset
Resets all picture settings except “Target Inputs” and “Picture Mode” to the factory
settings.
Backlight
Adjusts the brightness of the backlight.
Picture
Increases or decreases picture contrast.
Brightness
Brightens or darkens the picture.
Color
Increases or decreases color intensity.
Hue
Increases or decreases the green tones.
Tip
“Hue” can only be adjusted for a NTSC color system (e.g., U.S.A. video tapes).
Color Temperature
Adjusts the whiteness of the picture.
“Cool”: Gives the white color a blue tint.
“Neutral”: Gives the white color a neutral tint.
“Warm1”/“Warm2”: Gives the white color a red tint. “Warm2” gives a redder tint
than “Warm1”.
Tip
“Warm1” and “Warm2” can only be selected when you set “Picture Mode” to “Custom”.
010COV.book Page 18 Friday, September 8, 2006 9:24 AM