Sony KLV-26S200A Flat Panel Television User Manual


 
29
GB
KLV-46S200A
2-891-357-11(1)
Using Optional Equipment
Using the Tools menu in PC input mode
Press TOOLS to display the following options when
viewing pictures input from the connected PC.
To connect Do this
S VHS/Hi8/DVC
camcorder or video
game equipment
A
Connect to the S video jack 2
or the video jack 2, and the
audio jacks 2. To avoid picture
noise, do not connect the
camcorder to the video jack 2
and the S video jack 2 at the
same time. If you connect mono
equipment, connect to the L
(MONO) jack 2.
Headphones B Connect to the i jack to listen to
sound from the TV on headphones.
PC C Connect to the PC (RGB)
jack and the audio jack . It is
recommended to use a PC cable
with ferrites.
Digital satellite
receiver or digital
terrestrial receiver
D
Connect only to the HDMI IN
jack. The digital video and audio
signals are input from the digital
satellite receiver.
Tip
If the digital satellite receiver has an
HDMI jack, connecting via an HDMI
cable will provide the best results.
Note
When using an HDMI-to-DVI cable
or an adaptor, be sure to connect the
DVI output connector first; then
connect to the HDMI jack on the TV.
Video game
equipment, DVD
player without
component video
output, or VCR E
Connect to the S video jack
1 or the video jack 1 or
3, and the audio jacks 1 or 3.
To avoid picture noise, do not
connect the camcorder to the video
jack 1 and the S video jack
1 at the same time. If you
connect mono equipment, connect
to the L (MONO) jack 1 or 3.
DVD recorder or
VCR F
Connect to the video output jacks
to record the image from the
TV. Connect to the audio output
jacks to record the sound
from the TV on the DVD recorder
or VCR. To turn off the sound of
the TV speakers, set “Speaker” to
“Off” (page 24).
DVD player with
component video
output G
Connect to the component jacks
1, 2 and the audio jacks
1, 2. For better picture quality,
component connection is
recommended if your DVD player
has a component video output.
Hi-Fi audio
equipment H
Connect to the audio output jacks
to listen to the sound from the
TV on the Hi-Fi audio equipment.
To turn off the sound of the TV
speakers, set “Speaker” to “Off”
(page 24).
Options Description
Close Close the Tools Menu.
Power Saving See page 24.
Picture Mode See page 18.
Sound Mode See page 20.
Auto Adjustment See page 25.
Horizontal Shift See page 25.
Vertical Shift See page 25.
To connect Do this
010COV.book Page 29 Friday, September 8, 2006 9:24 AM