Sony KLV-26S200A Flat Panel Television User Manual


 
22
GB
KLV-46S200A
2-891-357-11(1)
Screen menu
You can select the options listed below on the Screen
menu. To select options in “Settings”, see “Navigating
through menus” (page 17).
Target Inputs
Selects whether to apply settings made in the Screen menu to all inputs, or only to
the input currently being watched.
“All”: Applies settings to all inputs.
“Viewing Only”: Applies settings only to the current input.
Wide Mode
For details about the wide mode, see page 15.
Auto Wide
Automatically changes the screen format according to the broadcast signal. To keep
your setting, select “Off”.
Tips
Even if you have selected “On” or “Off” in “Auto Wide”, you can always modify the format
of the screen by pressing repeatedly.
“Auto Wide” is available for PAL, SECAM and NTSC signals only.
4:3 Default
Selects the default screen mode for use with 4:3 broadcasts.
“Wide Zoom”: Displays conventional 4:3 broadcasts with an imitation wide screen
effect.
“Normal”: Displays conventional 4:3 broadcasts in the correct proportions.
“Off”: Keeps the current “Wide Mode” setting when the channel or input is changed.
Tip
This option is available only if “Auto Wide” is set to “On”.
Display Area
Adjusts the screen area displaying the picture.
“Normal”: Displays the picture in the original size.
“–1”/“–2”: Enlarges the picture to hide the edge of the picture.
Horizontal Shift
Adjusts the horizontal position of the picture for each screen format.
Vertical Shift
Adjusts the vertical position of the picture when the screen format is set to “Zoom”.
Vertical Size
Adjusts the vertical size of the picture when the screen format is set to “Zoom” or
“Wide Zoom”.
010COV.book Page 22 Friday, September 8, 2006 9:24 AM