Sony KLV-26S200A Flat Panel Television User Manual


 
27
GB
KLV-46S200A
2-891-357-11(1)
Using MENU Functions
Manual Program
Preset
Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”, press PROG +/- to select
the program number with the channel. You cannot select a program number that is
set to skip.
Program
/TV System/VHF or UHF
Presets program channels manually.
1 Select “Program”, then press .
2 Press
F/f to select the program number you want to manually tune
(if tuning a VCR, select channel 00), then press RETURN.
3 Press
F/f to select “TV System”, then press .
4 Press F/f to select the best received TV broadcast systems, then press
.
5 Press
F/f to select either “VHF Low”, “VHF High” or “UHF”, then press
.
Note
The frequency range indication (“VHF Low”, “VHF High” or “UHF”) switches
automatically.
6 Tune the channels as follows:
Press G/g to search for the next available channel. When a channel has been found,
the search will stop. To continue searching, press
G/g.
Repeat the procedure above to preset other channels manually.
Label
Assigns a name of your choice, up to five letters or numbers, to the selected channel.
This name will be displayed briefly on the screen when the channel is selected.
To input characters, follow steps 2 to 4 of “Program Labels” (page 26).
AFT
Allows you to fine-tune the selected program number manually if you feel that a
slight tuning adjustment will improve the picture quality.
You can adjust the fine tuning over a range of -15 to +15. When “On” is selected, the
fine tuning is performed automatically.
Audio Filter
Improves the sound for individual channels in the case of distortion in mono
broadcasts. Sometimes a non-standard broadcast signal can cause sound distortion or
intermittent sound muting when watching mono program.
If you do not experience any sound distortion, we recommend that you leave this
option set to the factory setting “Off”.
Note
You cannot receive stereo or dual sound when “Low” or “High” is selected.
Skip
Skips unused channels when you press PROG +/- to select channels (you can still
select a skipped channel using the number buttons).
010COV.book Page 27 Friday, September 8, 2006 9:24 AM