Filter
Top Products
19
First Time Operation
GB
First Time Operation
Switching On the TV and Tuning the TV Automatically
The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to: 1) choose the language
of the menu screen, 2) choose the country/region in which you want to operate the TV, 3) search and store all available
channels (TV Broadcast), and 4) change the order in which the channels (TV Broadcast) appear on the screen.
However, if you need to change any of these settings at a later date, you can do so by selecting the appropriate option in the
“Set Up” menu (see page 28).
1 Connect the TV to the mains (220–240 V AC, 50 Hz).
2 Press the (Power) switch on the TV to switch it on.
The first time you switch on the TV, the Language menu
appears automatically on the screen (Auto Startup).
To perform Auto Startup later, press 0 on the rear panel
of the TV.
3 Press / / or on the remote control to select the
language, then press OK to confirm your selection.
From now on, all the menus will appear in the selected
language.
4 The Country menu appears automatically on the screen.
Press or to select the country/region in which you
will operate the TV, then press OK to confirm your selection.
If the country/region in which you want to use the TV does
not appear in the list, select “–” instead of a country/region.
5 The Auto Tuning menu appears automatically on the screen.
Press OK to select Yes.
Language
Select Language
English
Nederlands
Français
Italiano
Deutsch
Türkçe
Ελληνικά
Español
Português
Polski
Česky
Magyar
Русский
Бьлгарски
Suomi
Dansk
Svenska
Norsk
Country
Select Country
–
United Kingdom
Ireland
Nederland
België/Belgique
Luxembourg
France
Italia
Schweiz/Suisse/Svizzera
Deutschland
Österreich
Do you want to start
automatic tuning ?
Ye s No
(continued)