Filter
Top Products
42
Additional Information
Using Optional Equipment
For mono equipment
Connect the phono plug to the L/G/S/I jack and press / repeatedly until the input symbol 4 or 4 appears on the
screen.
Select the “Sound Adjustment” menu and set “Dual Sound” to “A” (see page 24).
1 Connect your equipment to the designated TV socket, as indicated on pages 37 to 41.
2 Switch on the connected equipment.
3 To watch the picture of the connected equipment, press the / button on the remote control repeatedly until the correct
input symbol appears on the screen.
Symbol Input Signals
1 or 2 • Audio/video input signal through the Scart connector J or I.
1 • RGB input signal through the Scart connector J. This symbol appears only if an
RGB source has been connected.
2 • S video input signal through the Scart connector I.
3 • Component input signal through the Y, P
B/CB, PR/CR jacks C and audio input
signal through D.
4 • Video input signal through the phono jack F and audio input signal through G.
4 • S video input signal through the S video input jack E and audio input signal
through G.
4 Press the button on the remote control to return to the normal TV picture.
/ 1 Scart connector (J) outputs the video signal from only the TV tuner.
S
S
S