Filter
Top Products
Installing and Connecting the Projection TV
33
Installing and Connecting the Projection TV
Model name1[KP-46WT500] Model name2[KP-51WS500] Model name3[KP-57WS500] Model name4[KP-65WS500]
[4-088-847-12]
Adjusting the Convergence Automatically – FLASH FOCUS™ –
The projection tube image appears on the screen in three colors (red, green
and blue). If they do not converge, the color is poor and the picture blurs.
Before you use your projection TV, be sure to adjust the convergence.
The FLASH FOCUS feature allows you to adjust the convergence
automatically.
1 Receive a TV or cable TV program.
2 Press FLASH FOCUS.
The cross pattern shown below appears and FLASH FOCUS begins to
work. The adjustment is completed when the cross pattern becomes
white and you are returned to the program you were watching.
✍ It is recommended to perform FLASH FOCUS about 30 minutes after the
projection TV is first turned on.
✍ You cannot perform any other functions until FLASH FOCUS has
completed its cycle.
✍ If you perform any other operation while FLASH FOCUS is in progress,
FLASH FOCUS operation is canceled.
✍ Unshielded speakers or other metallic objects can cause picture
distortion if placed close to the projection TV.
Projection TV
front panel
01COV.book Page 33 Tuesday, July 30, 2002 3:46 PM