Sony KP-46WT500 Projection Television User Manual


 
Other Information
75
Other Information
Model name1[KP-46WT500] Model name2[KP-51WS500] Model name3[KP-57WS500] Model name4[KP-65WS500]
[4-088-847-12]
You get the same program in the
window picture as in the main
picture
Both may be set to the same channel. Try changing channels in either the main
picture or the window picture.
You may be running all your channels through a cable box. The cable box will
only unscramble one signal at a time, so you cannot use the Twin View feature. If
possible, run a direct cable to your projection TV’s VHF/UHF input (this will only
work if your cable system provides an unscrambled signal.)
You cannot get anything but TV
channels in your second picture
Be sure the video label has not been set to skip your video inputs. See the Setup
menu on page 59.
Favorite Channel does not
display your choices
Verify that Favorite Channel is set to Manual in the Channel menu (see
Favorite Channel” on page 53).
Some video sources do not
appear when you press TV/
VIDEO
Ensure that Video Label is not set to SKIP (see “Video Label” on page 59).
Problem Possible Remedies
01COV.book Page 75 Tuesday, July 30, 2002 3:46 PM