Filter
Top Products
34
Model name1[KP-46WT500] Model name2[KP-51WS500] Model name3[KP-57WS500] Model name4[KP-65WS500]
[4-088-847-12]
Using the Features
Using the Remote Control
The following table describes the buttons on the remote control that are for
more advanced functions.
Button Descriptions Outside Panel
Button Description
1 MUTING Press to mute the sound. Press again or press VOL + to
restore the sound.
2 SLEEP Press repeatedly until the projection TV displays the time
in minutes (15, 30, 45, 60, or 90) that you want the
projection TV to remain on before shutting off
automatically. Cancel by pressing until SLEEP OFF
appears or turning the power off. While the Sleep feature is
set, press once to view the remaining time.
3 ANT Changes between the VHF/UHF input and the AUX input.
4 DISPLAY Press once to display the current time and channel label (if
set) and channel number. Press again to turn Display off.
See page 57 for details on setting the time.
5 JUMP Press to jump back and forth between two channels. The
projection TV alternates between the current channel and
the last channel that was selected.
6 FREEZE Freezes the window picture. Press again to restore the
picture.
7 INDEX Press to enter the Scrolling Channel Index mode. You can
view and select from all receivable channels scrolling on
the screen without leaving the current one.
8 The joystick allows for movement of the on-screen cursor.
Pressing down on the center of the joystick selects the item.
9 VOL +/– Adjusts the volume.
q; PIC MODE Press repeatedly to step through the available video picture
modes: Vivid, Standard, Movie and Pro. Also available in
the Video menu. For details, see “Selecting Video Options”
on page 49.
qa FAVORITES Displays the Favorite Channels list. For details, see “Using
Favorite Channels” on page 40.
qs RESET Press when in a menu to reset the settings to the factory
defaults.
01COV.book Page 34 Tuesday, July 30, 2002 3:46 PM