Filter
Top Products
34
Basic Operations
SP
[]
VIDEO PLUS
Press
20:00
THU.4
8
12
PLUS CODE
2477691–
[]
DATE START STOP
580
PRG
0:1200:026
SP
SAT
TIMER REC
ON
[]
/
OFF button
The VIDEO Plus+ function allows you to simplify the task of making timer
recordings. Using VIDEO Plus+, you can make all the necessary settings
by just entering the desired programme’s 9-digit code, which is available
in your local programme guide. To take advantage of this function, you
must first set up your video TV and assign programme positions to the
various guide channels. For details, see “Setting up VIDEO Plus+
manually” on page 14.
Before you begin
• Press ;, PROGR +/– or a number button on the remote control, or
PROGR +/– on the video TV to switch on the video TV.
• Make sure that the time and date clock are set correctly. If not, refer to
“Setting the clock” on page 16.
• Make sure that the loaded cassette has its safety tab.
1 Press VIDEO Plus+.
The VIDEO PLUS menu appears.
2 Press the number buttons to enter the desired programme’s PlusCode.
3 Press OK.
The recording information appears: date, start and stop times, programme
position number.
Check that the information is correct. If it is not, press TIMER REC
CLEAR to cancel the setting.
SP
[]
OK
VIDEO PLUS
Sapet nd ress
20:00
THU.4
8
12
PLUS CODE
2477691–
[]
0–9
OK
VIDEO PLUS
Sap
et nd ress
20:00
THU.4
–
12
PLUS CODE
––––––––
[]
SP
[]
0–9
1
2
3
4
5
6
7
8
9
-/--
0
C
PROGR
PAUSE
PLAY
MENU
SLEEP
OK
ON
TIMER
TIMER
ON SCREEN
TIMER REC
ON/OFF
TIMER REC
CLEAR
REC
QUICK
TIMER
TAPE
SPEED
COUNTER
RESET
REPLAY
INDEX SEARCH
REW
STOP
FF
VIDEO Plus+
If you have made a mistake
entering programme‘s
PlusCode
Press TIMER REC CLEAR and re-
enter the correct number.
Recording TV Programmes Using
VIDEO Plus+