Sony KV-27FS210, KV-32FS210, KV-36FS210 CRT Television User Manual


 
14
Operating Instructions
Connecting Additional Equipment
Connecting a TV and VCR
1 Connect the coaxial cable from your TV antenna or cable service to the IN jack on your
VCR.
2 Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF
jack on the TV.
Optional connection
If your VCR is equipped with video outputs, you can get better picture quality by
connecting audio/video cables (not supplied) from AUDIO/VIDEO OUT on your VCR to
AUDIO/VIDEO IN on your TV.
For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does
not provide sound, so you still must connect the audio cables.
Using your TV with this connection
This connection allows you to do the following:
Program your Sony remote control to operate your VCR (see page 5).
To activate your remote, press to operate your VCR. To do this, first program your
remote control, then use the Channel Fix feature to set your TV to channel 3 or 4 (see page 31).
Press repeatedly to switch between VCR input (VIDEO input) and VHF/UHF
(local channels).
Optional connection
VCR
2
1
1
3
4
AUDIO OUT
(VAR/FIX)
VIDEO
L
(MONO)
R
L
R
(MONO)
S VIDEO
Y
PB
PR
5
Video (yellow)
Audio R (red)
Audio L (white)
From
cable/antenna
Rear of TV
01US01COV-BR2.book Page 14 Wednesday, April 23, 2003 2:44 PM