Filter
Top Products
Using the Menus
39
Using the Timer Menu
Current Time Set your TV to the current day and time. Press
to open the Current Time
menu:
1
Use the
F
or
f
buttons to enter the correct day and time, then press .
2 Press to exit the menu.
Timer 1 and
Timer 2
Scheduled
viewing
Use the timers to program your TV to turn on and off by day, time, duration, and
channel. The timer duration is a maximum of six hours. When the channel is
fixed, it is not necessary to set the channel.
1 Use the F or f
buttons
to highlight Timer 1 or Timer 2, then press .
2 Use the F or f
buttons
to enter the desired day, start time, duration, and
channel, then press . The timer status should be On when the Timer
has been set, and the timer light on the front panel of the TV should be on.
3 Press to exit the menu.
✍ When you perform Auto Program, Timer 1 and Timer 2 settings will be cleared. Also, in the event of
any loss of power, Current Time, Timer 1, and Timer 2 settings will be cleared.
To access the Timer menu, use the following steps:
To Display To Highlight To Select
Timer 1 : Set
Timer 2 : Set
:
AM
Video Audio Channel Parent Timer Setup Basic
Current Time
Program the time
Program
Move:
Select:
End:
✍ You must set the Current Time before you can use Timer 1 or Timer 2.
✍ Select Off to turn off the Timer. Your previous settings will be saved.
01US01COV-BR2.book Page 39 Wednesday, April 23, 2003 2:44 PM