Filter
Top Products
21
Additional TV Features
Names for channels are usually taken automatically from Teletext if available. You can however name a channel or an input
video source using up to five characters (letters or numbers).
Naming a channel
1. Press the MENU button on the remote control to display
the menu on the TV screen.
2. Press the DOWN arrow key to select the symbol on
the menu screen then press the RIGHT arrow key to
enter the ‘PRESET’ menu.
3. Press the DOWN arrow key to select ‘Manual
Programme’ then press the RIGHT arrow key to enter
the ‘MANUAL PROGRAMME PRESET’ menu.
4. Press the UP or DOWN arrow keys to select the channel
you wish to name.
5. Press the RIGHT arrow key repeatedly until the first
element of the ‘LABEL’ column is highlighted.
6. Press the UP or DOWN arrow keys to select a letter or
number (select ‘-’ for a blank) then press the RIGHT
arrow key to confirm. Select the other four characters in
the same way.
7. After selecting all the characters, press the OK button.
8. Repeat steps 4 to 7 if you wish to label other channels.
9. Press the MENU button to remove the menu from the
TV screen.
PICTURE CONTROL
Contrast
Reset
Format
Format
Picture Mode
Personal
. . . . . . . . .
Wide
PICTURE CONTROL
Contrast
Reset
Format
Format
Picture Mode
Personal
. . . . . . . . .
Wide
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Picture Rotation
0
PRESET