Filter
Top Products
To use PIP
1
Press the TV FUNCTION button on your remote to view a working
channel.
PIP
2
Press the
@
button and the window picture appears.
3
Use the yellow labeled buttons on your remote control to control the
PIP features. See page 18 for descriptions on the PIP control buttons.
To check your PIP
1
Press the TV FUNCTION button on your remote to view a working
channel.
2
Press the
8
button and select that same channel again. You should
now have tne same program playing in both your main window and
your picture window.
3
Use the yellow
CH+/-
to change the channel in the picture window.
4
Now use the main
CH+/-
on the bottom of your remote control to
change the channel in the main window.
WNIDEO
5
Press the
@
button to switch to other video inputs for other
equipment that is connected to any of the VIDEO IN jacks at the back
of your TV You should see a different picture in your PIP window for
each connected video equipment component. Make sure the
connected equipment is turned on and working when you perform
this test.
6 If the PIP feature does not work properly with the TV or the
connected video equipment component, refer to the Troubleshooting
section on pages 41-42 for possible solutions.