Filter
Top Products
Using Surround Sound
18
EN
Getting the Most Out of Dolby
Pro Logic Surround Sound
To obtain the best possible Dolby Pro Logic Surround
sound, first select the centre mode according to the
speaker system you have. Then, adjust each speaker
volume and delay time.
Note that you must have at least one additional pair of
speakers and/or one centre speaker to do the following
adjustments.
DELAY TIME
TEST TONE
SURROUND
ON/OFF
SURROUND
MODE
SURROUND
MODE
CENTER
LEVEL +/–
SURROUND
ON/OFF
DELAY TIME/
EFFECT
CENTER
MODE
CENTER
LEVEL +/–
REAR
LEVEL +/–
Selecting the centre mode
The receiver offers you four centre modes:
PHANTOM, 3 CH LOGIC, NORMAL, and WIDE. Each
mode is designed for a different speaker configuration.
Select the mode that best suits your speaker’s system
configuration.
1 Press SURROUND ON/OFF to turn on surround
sound.
2 Press SURROUND MODE repeatedly to select the
Dolby surround sound field (PRO LOGIC or
THEATER mode).
3 Press CENTER MODE repeatedly until the centre
mode you want appears in the display. Select the
centre mode as follows:
If you have
Front and rear
speakers, no
centre speaker
Front and centre
speakers, no rear
speaker
Front and rear
speakers, and a
small centre
speaker
Front and rear
speakers, and a
large centre
speaker
Select
PHANTOM
3 CH LOGIC
(3 Channel
Logic)
NORMAL
WIDE
So that
The sound of the
centre channel is
output from the front
speakers.
The sound of the rear
channel is output
from the front
speakers.
The bass sound of the
centre channel is
output from the front
speakers (because a
small speaker cannot
produce enough
bass).
For “complete”
Dolby Pro Logic
Surround sound.
REAR
LEVEL +/–