Filter
Top Products
21
EN
Additional Information
Specifications
Amplifier section
(DIN 1 kHz, 4 ohms)
75 W + 75 W
(DIN 1 kHz, 4 ohms)
Front:
50 W/ch
Centre:
50 W
(only in the PRO
LOGIC mode)
Rear:
50 W
PHONO: RIAA
equalization curve
±0.5 dB
CD, TAPE/MD, VIDEO:
10 Hz - 50 kHz ±1 dB
Power output
Stereo mode
Surround mode
Frequency
response
Inputs
PHONO
(MM)
CD
TAPE/MD,
TV/LD,
VIDEO
Impedance
50
kilohms
50
kilohms
S/N
(weighting
network,
input level)
74 dB
72 dB*
(A, 2.5 mV)
82 dB
82 dB*
(A, 150 mV)
Sensitivity
2.5 mV
200 mV
150 mV
* ‘78 IHF
TAPE/MD REC OUT:
Voltage 150 mV,
Impedance 10 kilohms
VIDEO AUDIO OUT:
Voltage 150 mV,
Impedance 10 kilohms
PHONES: Accepts low
and high impedance
headphones
Full mute
+10 dB at 70 Hz
±8 dB at 100 Hz and
10 kHz
65.0 - 74.0 MHz
87.5 - 108.0 MHz
75 ohms, unbalanced
Mono: 18.3 dBf, 2.2 µV
/75 ohms
Stereo: 38.3 dBf, 22.5 µV
/75 ohms
11.2 dBf, 1 µV
/75 ohms (IHF)
Mono: 76 dB
Stereo: 70 dB
Mono: 0.3 %
Stereo: 0.5 %
45 dB at 1 kHz
30 Hz - 15 kHz dB
60 dB at 400 kHz
531 - 1,611 kHz
Loop aerial
50 dB/m (at 999 kHz)
54 dB (at 50 mV/m)
0.5 % (50 mV/m,
400 Hz)
35 dB
S/N
Harmonic
distortion at
1 kHz
Separation
Frequency
response
Selectivity
Tuning range
Aerial
Usable
sensitivity
S/N
Harmonic
distortion
Selectivity
Outputs
Muting
BASS BOOST
TONE
Tuning range
Aerial terminals
Sensitivity
Usable sensitivity
FM tuner section
+0.5
–2
Inputs
Outputs
System
Power
requirements
Power
consumption
AC outlets
Dimensions
Mass (Approx.)
Supplied
accessories
VIDEO, TV/LD:
1 Vp-p 75 ohms
VIDEO:
1 Vp-p 75 ohms
MONITOR:
1 Vp-p 75 ohms
Tuner section: PLL
quartz-locked digital
synthesizer system
Preamplifier section:
Low-noise NF type
equalizer
Power amplifier section:
Pure-complimentary
SEPP
220-230 V AC, 50/60 Hz
160 W
Switched 100 W
430 x 145 x 300 mm
6.3 kg
FM wire aerial (1)
AM loop aerial (1)
Remote controller
(remote) (1)
Size AA (R6) batteries (2)
Video section
General
AM tuner section
Design and specifications are subject to
change without notice.