Filter
Top Products
GB-10
DIGITAL SATELLIT
BASIC FUNCTIONS
1. Display Screen
Before you can view the television program, you must perform the installation.
Therefore you will see only menu images at first.
After the television channels have been programmed, you will see the following picture(banner)
each time you switch channels:
● Press the RED ( ) key in view mode.
● Select the channel by pressing NUMERICAL ( ~ ) keys or / keys and select
TV/RADIO key to move to TV or Radio channel.
You will also see this picture each time you change channels.
When you press TV/RADIO key on the Remote Control Unit, TV and RADIO program are
toggled.
Detailed program information
● Press the RED ( ) key twice while you are viewing a program.
First you will see the banner described above.
After the RED ( ) key is pressed in the second time, detailed information for current program
can be displyed on another banner, if there is more information. When this information is more than
one page, / can be used for page up and down.
NNoottee
: This service depends on service provider.
2. Volume Control
To control the volume level :
● Press / keys to adjust the volume level.
● Press MUTE key to turn to silence mode.
● Press MUTE key again or / keys in order to cancel the mute function.
Left Audio Status
Program Information Current Favorite The number of soundtrack in current channelSignal Status
Parental Lock Channel Number Channel Name Right Audio Status
CAS Name
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 10