Filter
Top Products
TELLITE RECEIVER
GB-7
1. AC MAINS This is to plug in the AC mains power cord.
The input AC voltage range is 100V to 240V, 50Hz/60Hz supply.
2. LNB This port is to connect the coaxial cable from LNB of your dish.
The IF input is provided through this port and the input frequency range
is 950-2150 MHz. Also the voltage switching 13V and 18V is passed
through this port.
3. LOOP To enable the connection of an Analog receiver, The receiver is provided
with this ‘LOOP’ port.
4. RS 232 DATA PORT This is for connecting your receiver to a computer for reading and
loading data information. This is for the external modem for future
purposes only, too.
5. S-VHS This is for connecting STB to your TV by using S-VHS cable.
6. SPDIF Output for connection to a digital amplifier.
7. AV SCARTS This is for connecting to your AV scarts for TV & VCR or DVD player.
8. 0/12V This is for connecting to an external LNB switch.
9. VIDEO, AUDIO R/L These RCA connectors are for connecting any external video
and audio.
10. ANT.IN This is for connecting your local RF channels to your TV through Loop.
11. TV This is for connecting to your TV via RF cable.
12. TELEPHONE LINE The telephone lead(labeled in the diagram above) is intended for
connection to standard NORDIC telephone lines.
(Only 3models can be used for DSR 9510X, DSR 9510Y
and DSR 9510Z.)
Rear Panel
671012 5 9 4
8
32
1
11
DESCRIPTION
DSR 9500/9510 2.28 3/5/03 3:33 PM Page 7