Filter
Top Products
43 (GB)
4 Press v / V to move the cursor (B) to “BAUD
RATE” and press ENTER.
The following menu appears on the display panel.
BAUD RATE :9600
bps
5 Select the baud rate (9600bps, 19200bps or
38400bps) with v / V and press ENTER.
6 Press MENU.
The menu returns to the CONFIG (2/2) menu.
OSD Function
If the system is controlled by the Serial Remote mode,
the controlled functions appear on the screen.
You can hide the serial remote data as follows:
1 In the CONFIG (2/2) menu, Press v / V to move
the cursor (B) to “SERIAL REMOTE” and press
ENTER.
The following menu appears on the display panel.
ENTER
MENU
SERIAL REMOTE
BAUD RATE : 9600
SELECT SET END
OSD : ON
2 Press v / V to move the cursor (B) to “OSD” and
press ENTER.
The following menu appears on the display panel.
OSD : ON
Setting the SERIAL REMOTE
(PFM-42B2/42B2E only)
You can set the serial remote controls.
Setting the baud rate
This parameter is used to synchronize the baud rate to
the controlled device.
The factory default is 9600bps.
1 Press MENU.
The main menu appears on the display panel.
ENTER
MENU
MA I N MENU
INPUT SELECT
PIC CONTROL
PIC SIZE
CONF I G
MEMORY
REMOTE
STATUS
SELECT SET END
2 Press v / V to move the cursor (B) to “CONFIG”
and press ENTER.
The CONFIG (1/2) menu appears on the display
panel.
ENTER
MENU
CONF I G( 1 / 2 )
DISPLAY : ON
W-VGA : OFF
CLOSED CAPTION: OFF
COLOR SYSTEM:AUTO
SCREEN F I LL :CENTER
POWER CONTROL
SCREEN SAVER
SELECT SET END
YUV LEVEL : SMPTE
3 Press v / V move the cursor (B) to “SERIAL
REMOTE” on the CONFIG (2/2) menu and press
ENTER.
The following menu appears on the display panel.
ENTER
MENU
SERIAL REMOTE
BAUD RATE : 9600
SELECT SET END
OSD : ON
Setting the SERIAL REMOTE (PFM-42B2/42B2E only)