Filter
Top Products
51
GUIDE Plus+
10
Select “Confirm” using </,, and
press ENTER.
The display returns to the GUIDE Plus+
setup menu.
11
Wait one day until the programme
guide data can be received.
To cancel the settings
Press the red button (“Back”).
To return to the “Home” position
Press the blue button (“Home”).
The cursor returns to the home position on the
“Grid.”
To check the GUIDE Plus+ system
information
1 Press TV GUIDE.
2 Select “Setup” in the Menu Bar, and
press ENTER.
3 Select “GUIDE Plus+ system
Information” using M/m, and press
ENTER.
Check whether programme position numbers
are the same as the programme position
numbers set in the “Channel Setting.”
If you want to make adjustments to the
channel settings or change the channel name,
see “Channel Setting” in “Settings and
Adjustments” (page 93).
1 Select “Editor” in the Menu Bar, and
press ENTER.
2 Press , to move the cursor to the
right column.
3 Select the programme position you
want to check using M/m.
To change the input source, press the red
button (“Source”).
To change the programme position, see
“Channel Setting” on page 93.
b Note
To receive from the recorder a programme position
that can be received by either the set top box
receiver or the recorder, change the input source in
step 3.
If any programme positions are unused or
contain unwanted channels, you can hide
them.
For instance, if you are using your set top box
receiver to receive programme data
(connection B, page 15), all receivable
programme positions are displayed. Use this
function to hide any unwanted programme
positions.
1 Select “Editor” in the Menu Bar, and
press ENTER.
2 In the left column, select the
programme position you want to hide
or display using M/m.
3 Press the red button (“On/Off”).
The disabled positions will turn grey.
To show the disabled positions, press the
red button (“On/Off”) again.
b Notes
• You cannot record a programme position, if it is
not set in “Channel Setting” of “Settings and
Adjustments,” even if it is set to “On” in the
“Editor” in the Menu Bar.
• If you are using your set top box receiver to
receive programmes (connection B, page 15) and
are able to receive the same programme with both
the set top box and the recorder, change the
“Source” to receive the programme with the
recorder’s tuner.
Checking programme positions
Disabling programme positions