Filter
Top Products
60
3 Press the green button (“Edit”).
4 In the left column, select an item
using the red button (“Back”) or the
green button (“Next”), and adjust
using the number buttons or </M/m/
,.
You can change the date, start time, stop
time, programme position, or input
source.
The cursor moves to the right column.
5 Press the corresponding colour button
repeatedly to change settings.
• Red button (“Media”): Sets the
recording destination to either HDD or
DVD.
• Green button (“Frequency”): Selects
the recording pattern. The item changes
as follows:
Once t Daily t Mon-Fri (Monday
to Friday) t Mon-Sat (Monday to
Saturday) t Sun (every Sunday) t
...... t Sat (every Saturday) t Once
• Yellow button (“Rec Mode”): Selects
the recording mode (page 52).
6 Press , to display “Extend Time.”
7 Press the yellow button (“Extend
Time”) repeatedly to select the
duration time or to set the PDC/VPS
function.
The item changes as follows:
+0 Minutes t +10 Minutes t
+30 Minutes t +60 Minutes t VPS /
PDC t +0 Minutes
See “About the PDC/VPS function”
below.
z Hint
You can also extend the recording time while
recording by pressing OPTIONS and selecting
“Extend Rec.”
b Note
The new settings become effective when you exit
the GUIDE Plus+ system.
About the PDC/VPS function
PDC/VPS signals are transmitted with TV
programmes in some broadcast systems.
These signals ensure that timer recordings are
made regardless of any broadcast delays,
early starts, or broadcast interruptions.
To use the PDC/VPS function
Select “VPS / PDC” in step 7 above.
When you turn on this function, the recorder
starts scanning the channels before the timer
recording starts. If you are watching TV
when scanning starts, a message will appear
on the TV screen. If you want to watch TV,
switch to your TV’s tuner or turn off the
PDC/VPS channel scan function.
Note that if you turn off the PDC/VPS
channel scan function, the timer recording
will not start.
To temporarily turn off PDC/VPS channel
scan
Press OPTIONS and select “PDC/VPS Scan
Off.”
To ensure that the PDC/VPS function works
properly, turn off the recorder before the
timer recording starts. This will
automatically turn on the PDC/VPS channel
scan function while the recorder remains off.