Filter
Top Products
53
Timer Recording
2 Press </M/m/, to select a future
timer event you want to check/change/
cancel. Then press ENTER.
The Event Action menu appears.
3 Press M/m to select an option. Then
press ENTER.
The sub menu appears:
“Modify”:
Changes the timer setting.
Select an item using </, and adjust
using M/m. Select “OK” and press
ENTER.
“Erase”:
Erases the timer setting.
“Check Overlap”:
Checks for overlapped settings.
Select “Close” to return to the EPG
display.
To change or cancel the setting, repeat
steps 2 and 3 above.
b Note
If you set “Repeat rec.” to any option other than
“Off” in step 3, your EPG timer recording will be
converted into a standard timer recording. The
timer event icon disappears from the EPG display.
1 Press SYSTEM MENU.
The System Menu appears.
2 Select “TIMER LIST,” and press
ENTER.
The Timer List appears.
Timer information displays the recording
date, time, recording mode, etc.
:
Indicates that the setting is overlapped by
another setting.
z
(red):
Indicates the setting currently being
recorded.
:
Indicates that the timer recording cannot
be recorded as set, such as for a timer
recording that cannot be recorded in the
selected recording mode.
:
Indicates the setting is being recorded to
the HDD.
:
Indicates the setting is being recorded to
a DVD.
:
Indicates the setting that the Update
function is set for.
When all of the timer settings do not fit
on the list, the scroll bar appears.
To view the hidden timer settings, press
M/m.
Checking/Changing/Cancelling
using the Timer List
,continued