Filter
Top Products
88
Selects the EPG (Electronic Programme
Guide) type to use.
The default setting varies depending on the
country/region.
b
When you switch the EPG type, the timer settings
that have been set will be erased.
Displays the registration code of DivX video
files for this recorder.
ABOUT DIVX VIDEO-ON-DEMAND:
This DivX Certified
®
device must be
registered in order to play DivX Video-on-
Demand (VOD) content. Go to
vod.divx.com
with this code to complete the
registration process and learn more about
DivX VOD.
You can check the software version.
Changes the Command Mode of the
recorder to avoid interference with your
other Sony DVD recorder or player.
1 Select a Command Mode (“1,” “2,” or
“3 (Default setting)”), and press .
2 Set the Command Mode for the remote
so it matches the Command Mode for
the recorder you set above.
Follow the steps below to set the
Command Mode on the remote.
1 Hold down .
2 While holding down , enter the
Command Mode code number using
the number buttons.
3 Hold down both the number and
buttons at the same time for more
than three seconds.
EPG Type Select
GUIDE
Plus+
Select this to use the Gemstar
GUIDE Plus+ electronic
programme guide (page 36).
Freeview+ Select this to use the digital
electronic programme guide
(page 46).
DivX
®
Registration
Version
Command Mode
b
The default command mode setting for this
recorder and the supplied remote is “3.”
The remote does not function if different
command modes are set for the recorder and
remote. Set the same command mode.
You can check the Command Mode for the
recorder in the front panel display (page 13).