Sony RDR-GXD455 DVD Recorder User Manual


 
34
Watching TV
By connecting your TV to this recorder, you can
watch digital and analog channels on your TV.
1 Turn on this recorder.
2 Turn on the TV and switch the TV's input
selector so that the signal from the
recorder appears on your TV screen.
3 Press DIGITAL/ANALOG to select the
broadcast, digital or analog.
4 Press the number buttons to select the
channel you want to watch, and press SET.
For example, to select digital channel number
D11.1
t t t t
The front panel display should show the
following:
The TV screen should show the following:
For example, to select analog channel number
Ch23
t t
The front panel display should show the
following:
The TV screen should show the following:
z Hint
You can also select a channel using the CH +/– button.
Notes
If you do not press the SET button after setting the
number buttons, the channel is not changed.
When you change an analog channel to a digital
channel, press the DIGITAL/ANALOG button. Even if
you press the ·(dot) button, an analog channel is not
changed to digital.
If you receive new digital channels, or the black screen
appears on your TV, set “Auto Preset” of “Tuner
Preset” again (page 76).
Some digital channels do not have a “·” (dot). Refer to
the TV program.
Confirm the digital broadcast content of the channel
number received before timer recording. If the recorder
receives a digital broadcast without channel number
information, the recorder assigns the channel number
automatically.
11 22 33
44 55 66
77 88
00
99
"/1
Number
buttons,
SET,
· (dot)
DIGITAL/
ANALOG
CH +/–
11 11 11
SET
SP D11.1
No Disc
22 33
SET
SP Ch23
No Disc