Filter
Top Products
35
Setting the timer
Basic Operations
To stop recording
To stop the VCR while recording, press x STOP.
2
Press M/m to move the cursor (B) to “Timer
set/check,
” then press OK.
3
If necessary, press M/m to move the cursor (B) to the row that is to be set.
4
Set the channel number, start and stop time,
date, and tape speed:
1 Press , to flash each item in turn.
2 Press M/m to set each item.
To correct a setting, press < to return to that
setting and reset.
To record from a source connected to the LINE IN 1 or LINE-2 IN jacks,
press INPUT SELECT or M/m to display “L1” or “L2” in the “CH”
position.
To record the same program every day or the same day every week, press m
while the date is flashing. For details, see “Daily/weekly recording” below.
To use the Auto Tape Speed function, press m to display “AUTO” in the
“SPD” position. For details, see “To use the Auto Tape Speed function” on
page 36.
5
Press OK to confirm the setting.
To enter another setting, press M/m to select the next row and repeat step 4.
6
Press MENU to exit the menu.
7
Press ?/1 to turn off the VCR.
The TIMER indicator appears in the display window and the VCR stands by
for recording. When using a cable box, leave it on.
OK
PLAY
Select
::End
:
CH START STOP DATE
SPD
OK
Bb
MENUQuit
Set :Vv
–– –:–– –:–– ––– --
–– –:–– –:–– ––– --
–– –:–– –:–– ––– --
–– –:–– –:–– ––– --
–– –:–– –:–– ––– --
–– –:–– –:–– ––– --
–– –:–– –:–– ––– --
–– –:–– –:–– ––– --
OK
PLAY
OK
PLAY
INPUT
SELECT
Select
::End
:
CH START STOP DATE
SPD
OK
Bb
MENUQuit
Set : Vv
35 8:00 9:00 9/30 SP
–– –:–– –:–– ––– --
–– –:–– –:–– ––– --
–– –:–– –:–– ––– --
–– –:–– –:–– ––– --
–– –:–– –:–– ––– --
–– –:–– –:–– ––– --
–– –:–– –:–– ––– --
P
M
P
M
OK
PLAY
MENU
continued