39
Playing/searching at various speeds
Additional Operations
Using Playback Dial on the VCR
With Playback Dial, you can operate the following playback options.
Tips
• Adjust the picture using the TRACKING +/– buttons if:
– Streaks appear while playing in slow motion.
– The picture shakes during pause.
• The VCR turns on and starts playback automatically by pressing H PLAY on the VCR
with
the VCR power turned off.
Notes
• The sound is muted during these operations.
• Tapes recorded in the LP mode on other VCRs can be played back on this VCR but the
picture quality cannot be guaranteed.
• The picture may show noise when playing at high speed in reverse.
• Do not turn Playback Dial forcibly. It may damage Playback Dial.
To Do this
View the picture during fast-
forward or rewind
During fast-forward, turn and hold Playback Dial to the right (M FF).
During rewind, turn and hold Playback Dial to the left (m REW).
Play at high speed • During playback, quickly turn and release Playback Dial to the right
(M FF) or left (m REW). The tape continues to play at high
speed.
• During playback, turn and hold Playback Dial to the right (M FF)
or left (m REW). When you release Playback Dial, normal
playback resumes.