Filter
Top Products
46
Recording TV programmes
Master Page : Left
filename[010bas.fm] model name1[SLV-SE610A/E] model name2[SLV-SE710D/E]
model name3[SLV-SX710D/E] model name4[SLV-SX717D/E]
model name5[SLV-SE810D/E] model name6[SLV-SX810D]
[3-065-674-E1(1)]
time counter and the remaining time appear alternately. The indicator
indicates the remaining time.
In order to get an accurate remaining time indication, be sure TAPE
LENGTH in the OPTIONS-1 menu is set according to the tape type you use
(see page 82).
To watch another TV programme while recording
To save a recording
To prevent accidental erasure, break off the
safety tab as illustrated. To record on the
same tape again, cover the tab hole with
adhesive tape.
Tips
• To select a programme position, you can use the
programme number buttons on the remote
commander. For two-digit numbers, press the
- (ten’s digit) button followed by the programme number buttons.
• If you connect additional equipment to a LINE connector or jack, you can select
the input signal using the INPUT SELECT or PROG +/– buttons.
• The DISPLAY information appears on the TV screen indicating information
about the tape, but the information won’t be recorded on the tape.
• If you don’t want to watch TV while recording, you can turn off the TV. When
using a decoder, make sure to leave it on.
Notes
• The DISPLAY information does not appear during still (pause) mode or slow-
motion playback.
• The DISPLAY information will not appear while playing an NTSC-recorded
tape.
1
Press t TV/VIDEO to turn off the VIDEO indicator in the display
window.
2
Select another programme position on the TV.
61:4SP 20:00:2
Remaining timeTime counter
Safety tab