Filter
Top Products
85
Connecting to a VCR or stereo system
Editing
Master Page : Right2
filename[010addo.fm] model name1[SLV-SE610A/E] model name2[SLV-SE710D/E]
model name3[SLV-SX710D/E] model name4[SLV-SX717D/E]
model name5[SLV-SE810D/E] model name6[SLV-SX810D]
[3-065-674-E1 (1)]
Example C
How to connect to a stereo system
(SLV-SE810D/E and SX810D only)
Connect the t LINE-2 L o R jacks on this VCR to the audio output jacks
on the stereo system, using the RK-C510HG audio cable (not supplied).
Notes
• Make sure you connect the plugs to jacks of the same colour.*
1
• If the other VCR is a monaural type, leave the red plugs unconnected.
• If you connect this VCR to both the LINE IN and LINE OUT jacks of the other
VCR, select the input correctly to prevent a humming noise.
• If the other VCR does not have a Scart (EURO-AV) connector, use the VMC-
2106HG cable instead and connect the cable to the line out jacks of the other VCR.
• When you connect another VCR to the DECODER/LINE-3 IN*
1
(or DECODER/
LINE-2 IN*
2
) connector, set DECODER/LINE3*
1
(or DECODER/LINE2*
2
)to
LINE3*
1
(or LINE2*
2
) in the OPTIONS-2 menu.
*
1
SLV-SE810D/E and SX810D only
*
2
SLV-SE610E, SE710D/E, SX710D/E, and SX717D/E only
TV
DECODER/
t LINE-3 IN*
1
or
DECODER/
t LINE-2 IN*
2
VMC-2121HG Scart cable (not supplied)
Scart
(EURO-AV)
: Signal flow
Your VCR (Recorder)
Other VCR (Player)