Filter
Top Products
Getting Started
15
Setting up the DVD-VCR with the Auto Set Up function
To cancel the Auto Set Up function
Press O RETURN.
To change the RF channel
If the picture does not appear clearly on the TV, change the RF channel on the DVD-
VCR and TV. Select (INSTALLATION) from the menu, then press V/v to
select VIDEO OUTPUT CH. Select the RF channel by pressing the B/b buttons.
Then, tune the TV to the new RF channel so that a clear picture appears.
Tip
• If you want to change the language for the on-screen display from the one preset in the Auto
Set Up function, see page 16.
Notes
• Whenever you operate the Auto Set Up function, some of the settings (VIDEO Plus+, timer,
etc.) will be reset. If this happens, you have to set them again.
• Auto preset starts automatically only when you plug in the mains lead for the first time after
you purchase the DVD-VCR.
• If you want to use the Auto Set Up function again, press SET UP, then press V/v/B/b to
select (INSTALLATION) and press ENTER. Press V/v to select AUTO SET UP.
• Auto preset can be performed by pressing x on the DVD-VCR
continuously for 5 seconds or
more during power off with no tape inserted.