Sony SLV-D930 DVD VCR Combo User Manual


 
105
Troubleshooting
Additional Information
Troubleshooting
If you have any questions or problems not covered below, please consult your nearest Sony
service facility.
General Troubleshooting
Symptom Remedy
Power
The ?/1 (on/standby) switch does
not function.
Connect the mains lead to the mains securely.
The power is turned on but the DVD-
VCR does not operate.
Moisture condensation has occurred. Turn the power off,
unplug the mains lead and leave the DVD-VCR to dry for
over three hours.
Clock
The clock has stopped and “--:--”
appears in the display window.
The clock stops if the DVD-VCR is disconnected from
the mains. Reset the clock (and timer).
Others
The remote commander does not
function.
Make sure you are pointing the remote commander at the
remote sensor on the DVD-VCR.
Replace all the batteries in the remote commander with
new ones if they are weak.
Make sure the TV
/ DVD·VIDEO switch is set correctly.
Select correctly VIDEO or DVD with the SELECT DVD/
VIDEO button.
The tracking meter does not appear
on the screen.
The recording condition of the tape is very poor and
tracking cannot be adjusted.
You cannot control other TVs. Set your TV’s code number. The code number may
change when you replace the batteries of the remote
commander.
continued