Filter
Top Products
29
Playing discs
Basic Operations
Notes
• You may not be able to use the Instant Replay or Instant Advance function with some scenes.
• Switching between original (ORG) and play list (PL) within a disc recorded in VR mode is
possible only while the disc is stopped. Press TOP MENU to switch between ORG and PL.
To Resume playback for the current disc (Resume Play)
The DVD player remembers the point where you stopped the disc even if the DVD
player enters standby mode by pressing ?/1.
Tip
• To begin playback from the top of the disc, press x twice then press H.
To locate a point quickly by playing a disc in fast forward or fast reverse
in continuous play mode
Press m or M on the remote (or hold down m or M on the unit).
Each time you press the button, the playback speed changes as follows.
• DVD:
PLAY t FF1/FR1 t FF2/FR2 t FF3/FR3 t FF4/FR4 t FF5/FR5 t
FF6/FR6
• CD, MP3 and VIDEO CD:
PLAY t FF1/FR1 t FF2/FR2 t FF3/FR3
When you find the point you want, press H.
Note
• The fast reverse operation may not be possible for CD, MP3 and VIDEO CD depending on
the recording method.
To watch slow motion in continuous play mode (DVD and VIDEO CD
only)
Press X, then press
or y. With each press, the playback speed changes
cyclically as follows.
* You can not watch reverse slow motion with DVD-RW in VR mode. Reverse slow motion
playback also may not be possible for some VIDEO CDs depending on the recording
method.
To resume normal playback, press H.
Tips
• To make a video timer reservation during DVD playback, we recommend performing the
operations under “Quick Timer Recording” (page 90).
• During DVD playback, DVD-VCR does not standby even if the VCR stops recording.
1
While playing a disc, press x to stop playback.
2
Press H.
The DVD player starts playback from the point where you stopped the disc in
Step 1.
continued