Filter
Top Products
Basic Operations
37Basic Operations
SLV-X827MN 3-858-297-11 (1)
3 Press CURSOR / to confirm the setting.
The cursor (I) appears at the beginning of the line. To enter another
setting, move the cursor to the next line and repeat step 2.
4 Press EXECUTE.
5 Press u to turn off the VCR.
The TIMER indicator appears in the display window and the VCR
stands by for recording.
To record from other equipment, leave the connected equipment
switched on.
To stop recording
To stop the VCR while recording, press p STOP.
Daily/weekly recording
In step 2 above, press CURSOR . to select the recording pattern. Each time
you press CURSOR ., the indication changes as shown below. Press
CURSOR > to change the indication in reverse order.
Tips
• To set the programme position, you can also use the PROG +/– or programme
number buttons.
• To set the tape speed, you can also use TAPE SPEED.
• To record NTSC signals, set the tape speed to SP or EP. To set the EP mode, display
“LP” in the tape speed position.
Note
• “TIMER” flashes in the display window when you press u with no tape inserted.
the current date n SUN-SAT n MON-SAT n MON-FRI n EVERY SAT .....
n EVERY MON n EVERY SUN n 1 month later n(dates count down)
n the current date
•
CURSOR
• EXECUTE
•