Filter
Top Products
7Getting Started
SLV-X827MN 3-858-297-11 (1)
Getting Started
Manufacturer Code number
Sinudyne 37
TEAC 67
Telefunken 36
Thomson 43*
2
Toshiba 38
White
Westinghouse 34
Manufacturer Code number
Saba 12,13
Samsung 22,23
Sanyo 25
Schneider 46
Seleco 14
Sharp 29
Siemens 39
You can use the WIDE button after entering a code number with any of the
following marks;
*
1
: Press WIDE to switch the wide picture mode on or off.
*
2
: Press WIDE, then press VOL+/– to select the wide picture mode you
want.
*
3
: Press WIDE. The menu appears on the TV screen. Then, press CURSOR
>/./?// to select the wide picture you want and press EXECUTE.
Notes
• If the TV uses a different remote control system from the one programmed to work
with the VCR, you cannot control your TV with the remote commander.
• If you enter a new code number, the code number previously entered will be erased.
• When you replace the batteries of the remote commander, the code number
automatically resets to 01 (Sony). Reset the appropriate code number.