Filter
Top Products
6 Getting Started
SLV-X827MN 3-858-297-11 (1)
Manufacturer
Sony 01*
1
,02,03,04,05
Aiwa 32
Akai 68
Blaupunkt 10,21
Brionvega 40
C.G.M 09
Colonad 03
Dual 44
Emerson 03,04
Fenner 30,31
Ferguson 52
Gold Star 03,04,17
Grundig 10*
1
,11*
1
Hitachi 24
Hyper 31
Step 2: Setting up the remote commander (continued)
Controlling other TVs with the remote commander
The remote commander is preprogrammed to control non-Sony TVs. If your
TV is listed in the table below, set the appropriate manufacturer’s code
number.
1 Set TV / VIDEO at the top of the remote commander to TV .
2 Hold down u, and enter your TV’s code number(s) using the number
buttons. Then release u.
Now you can use the u, VOL +/–, PROG +/–, programme number buttons,
? (ten’s digit) and TV/VIDEO buttons to control your TV. You can also
use the buttons marked with a dot (•) to control a Sony TV. To control the
VCR, reset TV / VIDEO to VIDEO .
Tip
• If you set your TV’s code number correctly while the TV is turned on, the TV turns
off automatically.
Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until
you find the one that works with your TV.
Manufacturer
Inno-Hit 41
Irradio 20
ITT/Nokia 15,16,69*
3
JVC 33*
1
Loewe 45
Mitsubishi 27*
1
,28*
1
,50*
1
,51*
1
Mivar 09
NEC 66
Nordmende 35,42
Orion 47,48
Panasonic 17*
1
,49
Philips 06*
1
,07*
1
,08*
1
Phonola 18,19
Pioneer 26
Code number
Code number