Filter
Top Products
7
Getting Started
Unpacking
Check that you have the following items:
• Audio/video/S-link connecting cord (1)
• S video cord (1)
• Plug adaptor (1) (DVP-S533D only)
• Remote commander (remote) RMT-D108A (1)
• Size AA (R6) batteries (2)
Inserting batteries into the remote
You can control the player using the supplied remote.
Insert two Size AA (R6) batteries by matching the + and –
on the batteries. When using the remote, point it at the
remote sensor g on the player.
z
You can control TVs and AV receivers using the supplied
remote
See page 53.
Notes
• Do not leave the remote in an extremely hot or humid place.
• Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
• Do not expose the remote sensor to direct sunlight or lighting
apparatuses. Doing so may cause a malfunction.
• If you will not use the remote for an extended period of time,
remove the batteries to avoid possible damage from battery
leakage and corrosion.
Getting
Started
This section describes how to hook up
the CD/DVD player to a TV (with
audio/video input jacks) and/or an
AV receiver (amplifier). You cannot
connect this player to a TV which
does not have a video input
connector. Be sure to turn off the
power of each component before
making the connections.