Filter
Top Products
19
Additional Operations
Using the shuttle ring
With the shuttle ring, you can operate a variety of playback options. There
are two ways for using the shuttle ring, normal mode and jog mode.
To use the shuttle ring in normal mode
During playback or pause, turn the shuttle ring clockwise or
counterclockwise. Each change in the shuttle ring position changes the
playback mode, and the corresponding mark appears on the TV screen for a
few seconds in the following way if the on-screen display function is on:
Mark on the TV screen
Slow motion Pause Slow motion
in reverse
Playback mode Normal speed Double speed High speed
High speed Double speed Normal speed
in reverse in reverse in reverse
X2
X2–X1–
To use the shuttle ring in jog mode
Use this mode for frame-by-frame playback.
Press JOG to enter jog mode. The JOG button lights up. If you change to jog
mode during any playback mode, the playback pauses so you can see a still
picture. Each change in the shuttle ring position shifts the picture one frame.
To shift frames in reverse, turn the shuttle ring counterclockwise.
The frame shift speed depends on the speed you turn the shuttle ring.
To resume normal playback, press JOG again. The JOG indicator goes off.
To resume normal playback
Press · PLAY.
continued