Filter
Top Products
12 (US)
Amplifier section
Rated Output Power Front: 10 W + 10 W, (per channel)
8 ohms, 1 kHz, THD less than 1%
Subwoofer: 20 W, 6 ohms, 100 Hz,
THD less than 1%
HDMI section
Connector HDMI™ Connector
Video inputs/outputs 720 × 480p (60Hz) 16:9
1280 × 720p (60Hz) 16:9
1920 × 1080i (60Hz) 16:9
1280 × 720p (50Hz) 16:9
720 (1440) × 480i (60Hz) 4:3
720 (1440) × 480i (60Hz) 16:9
720 (1440) × 576i (50Hz) 4:3
720 (1440) × 576i (50Hz) 16:9
1920 × 1080p (60Hz) 16:9
720 × 576p (50Hz) 16:9
1920 × 1080i (50Hz) 16:9
1920 × 1080p (50Hz) 16:9
1920 × 1080p (24Hz) 16:9
1920 × 1080p (30Hz) 16:9
1280 × 720p (24Hz) 16:9
1280 × 720p (30Hz) 16:9
Deep Color: 30bit/36bit
Video inputs/ 1280 × 720p@59.94/60 Hz
outputs (3D) Frame packing
1920 × 1080i@59.94/60 Hz
Frame packing
1920 × 1080i@59.94/60 Hz
Side-by-Side (Half)
1920 × 1080p@59.94/60 Hz
Side-by-Side (Half)
1280 × 720p@50 Hz
Frame packing
1920 × 1080i@50 Hz
Frame packing
1920 × 1080i@50 Hz
Side-by-Side (Half)
1920 × 1080p@50 Hz
Side-by-Side (Half)
1920 × 1080p@24 Hz
Frame packing
Deep Color: 30bit/36bit
Audio inputs Linear PCM 2ch/5.1ch/7.1ch
Dolby Digital
DTS
Each signal is compliant with 32, 44.1,
48 kHz.
Speakers
Front speaker unit
Speaker system 2-way 2-driver, Bass reflex type
Speaker unit Woofer: 30 × 100 mm cone type ×1
Tweeter: 30 mm cone type
Subwoofer unit
Speaker system Subwoofer, Bass reflex type
Speaker unit 70 mm cone type
General
Power requirements 100 – 240 V, 50/60 Hz
Power consumption
On: 12 W
Standby: 0.7 W
Design and specifications are subject to change without
notice.
Specifications
SU-B401S
Dimensions:
mm (inches)
A
110
(4 3/8)
B
151
(6)
C
944
(37 1/4)
D
612
(24 1/8)
E
261
(10 3/8)
Stand Weight:
4.9 kg
(10.8 lb)
336 mm
(13 1/4 inches)
64 mm
(2 5/8
inches)
38 mm
(1 1/2 inches)
• Standby power consumption: 0.7 W
• Halogenated flame retardants are not used in the certain
printed wiring boards.
• Over 85% power efficiency of amplifier block is
achieved with the full digital amplifier, S-Master.