Filter
Top Products
9 (US)
3 Anchor the TV to the Wall.
Anchor the TV to the wall by using bolts, wall
anchor and chain (or rope).
~
• TV SET is shipped with screws attached to the rear of the
TV. (They are fastened in the screw holes for wall
mounting.) Be sure to remove the upper two screws prior to
anchoring the TV on a wall.
• Securing the TV to the board without securing the TV and
the board to the wall provides minimum protection against
the TV toppling over. For further protection, be sure to
follow the three measures recommended.
Anchor bolts (M6, not supplied)
Wall-
mount
holes
Rope or chain
(not supplied)
Wall-anchor
(not supplied)
Step 4:
Connecting the TV and
Player
Connect the TV with an HDMI IN 1
to the TV Stand using an HDMI
cable.
By connecting Sony “BRAVIA” Sync-compatible
components using HDMI cables, operation can be
simplified when you set the Control for HDMI function
for the TV.
~
• Please do not connect PC with HDMI.
• The TV Stand is compatible with the Audio Return
Channel (ARC) function. If you connect the TV Stand to
the ARC compatible TV’s HDMI IN 1 via an HDMI cable,
you do not need to connect the TV to the TV Stand with the
digital optical cord.
• You can see the letters “ARC” beside the TV’s HDMI jack
if it is compatible with the ARC function. Even if you
connect an HDMI cable to the jack, if the HDMI input jack
is not compatible with the ARC function, you cannot use
the ARC function.
• The ARC function is available only when Control for
HDMI is set to on.
z
• Even if the TV Stand is turned off (active standby mode),
the HDMI signal will be sent from the connected
component to the TV via the HDMI connection. You can
enjoy image and sound from the component on the TV.
Notes on HDMI connections
• Use a High Speed HDMI cable. If you use a Standard
HDMI cable, 1080p, Deep Color, or 3D images may not be
displayed properly.
• We recommend that you use an HDMI-authorized cable.
HDMI cable
(not supplied)
HDMI cable
(supplied)
Blu-ray Disc Player, etc.
(Continued)