Filter
Top Products
7 (US)
3
Attach the supplied Joint to the
rear of the TV with the three
screws (PSW5 × 16) (supplied).
Slide the supplied Joint up to attach.
~
• Make sure to keep the removed screws.
• When removing the Table-Top Stand from the Display, lay
the display face down on a stable work surface that is larger
than the Display.
• To prevent damaging the surface of the LCD display, make
sure to place a soft cloth on the work surface.
• If pressure or shock is applied to the surface of the Display,
the LCD display may break or become damaged.
• Lay the display face down on a stable and level surface
with the Table-Top Stand hanging over the edge of the
surface.
Having the display face and the base of the Table-Top
Stand on the same level surface will create an unstable
working condition and can damage the Display.
4
Install the TV onto the TV Stand.
The TV is installed by placing it in the groove of the
TV Stand.
Arrow direction shows front of the TV Stand.
Joint
Joint Screw
(PSW5 × 16)
CAUTION
5
Secure the TV and the TV Stand
with the three TV Stand Neck
Attachment Screws (PSW5 × 16)
(supplied).
6
Bundling the cables.
Use the cable clamper supplied with the TV.
~
• Do not bundle the AC power cord together with other
cables.
TV Stand Neck
Attachment
Screw
(PSW5 × 16)