Filter
Top Products
Using the DTV Features
43
Using the Timer
You can use the Timer to program the DTV to turn on and off and
tune to a specific channel at two scheduled viewing times.
The first time you turned on the DTV, a setup screen prompted you to
set the clock (see “Setting Up the DTV Automatically” on page 30). If
you didn’t set the clock during this initial setup, you need to set it
before you can use the Timer (see page 44).
Setting the Timer 1 Press TIMER.
The Set Clock/Timers screen appears, with the current timer
settings shown.
2 To set the Timer, move the joystick V or v to highlight Timer 1 or
Timer 2, then press .
3 Move the joystick V or v to highlight one of the following
options
, then press .
4 If you selected Set in step 3, the setup screen for the selected Timer
(
Timer 1 or Timer 2) appears.
✍ The clock must be set before you can set either of the Timers. If the clock
is not set, Timer 1 and Timer 2 cannot be selected. To set the clock, see
“Setting the Clock” on page 44.
Set Select to set or change the timer settings for the selected
Timer (Timer 1 or Timer 2).
On Select to turn on the timer settings for the selected Timer
(Timer 1 or Timer 2).
Off Select to turn off the timer settings for the selected Timer
(Timer 1 or Timer 2).
You can also access the
Timer through the Setup menu.
For details, see page 58.
z
Using.fm5 Page 43 Friday, July 6, 2001 1:50 PM