Filter
Top Products
DVR-4CF
22
8.3.1 CAMERA SETTING
CAMERA SEUP ■■■
> CAMERA SELECT CH1
RECORD ENABLE ON
MOTION DETECTION ON
MOTION SENSITIVITY 03
HUE 08
CONTRAST 08
BRIGHTNESS 08
PRESS (< >), THEN (ENTER)
PRESS (MENU) TO EXIT
1. Cursor (>) position indicates the current function selected.
2. Press《←》and《→》button to move the cursor to the desired item.
3. Press《ENTER》button to make changes.
4. Press《MENU》button to exit “CAMERA SETUP” selection.
5. CAMERA SELECT: Press《ENTER》button to select the desired channel.
6. RECORD ENABLE: Press《ENTER》button to switch the channel recording ON/ OFF.
7. MOTION DETECTION: Press《ENTER》button to switch the motion detection
function ON/ OFF.
8. MOTION SENSITIVITY: Press《ENTER》button to setup the motion sensitivity
rate (5 sensitivity rate values, 01 most sensitive).
9. HUE: Press《ENTER》button to adjust the color of cameras (15 color adjustment
values, default value: 08 ).
10. CONTRAST: Press《ENTER》button to adjust the camera contrast (15 contrast adjustment
values, default value: 08).
11. BRIGHTNESS: Press《ENTER》button to adjust camera brightness (15 color adjustment
values, default value: 08 ).